5L STRONGBOLT BS SASH 68MM PB J2200S-PB-2.5

Description:

UNION STRONGBOLT 68MM SASHLOCK IN PB FINISH

The Union Strongbolt 5 lever sashlock is suitable for use on doors up to 54mm in thickness and for both left and right hand installations, thanks to its easily reversible latch. The Strongbolt has been successfully tested to BSEN3621 and 12209 for security, BSEN1634 for use on 30 and 60 minute fire doors (when fitted with appropriate intumescent protection), and accreditation under the Secured By Design scheme.

It has key operation from both sides and features a deadbolt with hardened steel rollers as well as chamfered edges, making it harder to cut or force open.

The Union Strongbolt mortice sashlock is available in 68mm case depth with 45mm backset, and 81mm case depth with a 57mm backset, and with either polished brass or satin stainless steel finishes to the fore-end and strike plates. The lock comes complete with two keys but if you need more please click here to add them to your basket, and we will get those cut and sent with your order.

Also available are appropriate intumescent kits, and rebate kits for use on rebated double doors.

Please see full details below.

• Complies to BS EN 3621, BS EN 12209 and BS EN 1634
• Secured By Design approved
• CE marked and Certifire approved
• Anti-pick, anti-saw and anti-drill security features for resistance against attack
• Chamfered bolt design increases the performance of the lock under side load testing.  The chamfer of the bolt also makes drilling attack more difficult
• Radius inner forend for ease of installation
• Reversible latch bolt
• Deadbolt locked or unlocked by the key from either side
• 20mm deadbolt for secure positive deadlocking and additional resistance against attack
• Can be keyed alike with other 2200S sashlocks and also 2100S deadlocks
• Can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door
• Anti-pick and keyhole protection prevents forced entry by picking
• Hardened steel pins provide resistance to attack from sawing

IMPORTANT INFORMATION:
We stock the dedicated intumescent protection to suit this lock and will require ordering seperately.

Case depth: 68mm
Backset: 44mm
Case height: 110mm
Centres: 57mm
Forend length: 162mm
Forend width: 26mm
Strike plate length: 180mm
Strike plate width: 26mm