DIN STANDARD BATHROOM LOCK CASE AR913-S-60-SSS

Description:

The Hoppe DIN Standard bathroom lock case is appropriate to use in public and commercial environments, and is often used in contemporary housing designs with lever on rose door handles and bathroom turns. Tested  Complete with a satin stainless steel finish forend and strike plate, plus all fixings.

• AR913-S-60-SSS
• 8mm bathroom follower with 5mm adapter sleeve included
• CE marked and Certifire approved
• Tested to BS EN 1634-1. Assessed for use on 30, 60, 90 and 120 minute timber fire doors and 240 minutes steel fire doors.
• Tested to BS EN 12209:2003
• Meets dimensional recommendations of BS 8300 and Approved Document M for locks
• Tested to BS EN 179. To comply with BS EN 179, only lever handles and associated fixings included in the test evidence must be used.
• Pierced for bolt through fixings

IMPORTANT INFORMATION:
The AR913 series lock case has been successfully fire tested with the use of an intumescent kit. The supply and fitting of this intumescent kit is essential to the products compliance with the fire test and CE marking evidence it has gained.

Case depth: 88mm
Backset: 60mm
Case height: 165mm
Centres: 78mm 
Forend length: 235mm
Forend width: 24mm